Wall to wall carpet cleaning process
1. Pre-inspection:
3. Pre-treatment of Stains(if required):
1. Pre-inspection:
A pre-inspection of the carpet is conducted to identify areas with heavy soiling, stains, or specific concerns. This helps in tailoring the cleaning process to the specific needs of the carpet.
2. Pre-vacuuming:
3. Pre-treatment of Stains(if required):
1. Pre-inspection:
Before the deep cleaning process begins, the carpet is pre-vacuumed to remove loose dirt and debris. This step helps improve the effectiveness of the subsequent cleaning steps.
3. Pre-treatment of Stains(if required):
3. Pre-treatment of Stains(if required):
3. Pre-treatment of Stains(if required):
Stains and spots on the carpet are pre-treated with specialized cleaning solutions. These solutions are often applied and allowed to dwell to break down stains and make them easier to remove during the cleaning process.
4. Application of Cleaning Solution:
6. Hot Water Extraction (Steam Cleaning):
3. Pre-treatment of Stains(if required):
A carpet cleaning solution is applied to the entire carpet using the truck-mounted machine. This solution helps to loosen and suspend dirt, oils, and other contaminants in the carpet fibers.
5. Agitation:
6. Hot Water Extraction (Steam Cleaning):
6. Hot Water Extraction (Steam Cleaning):
Depending on the level of soiling, an agitation step may be introduced. Using our Counter Rotating Brush Pro it helps distribute the cleaning solution evenly and ensures that it reaches deep into the carpet fibers.
6. Hot Water Extraction (Steam Cleaning):
6. Hot Water Extraction (Steam Cleaning):
6. Hot Water Extraction (Steam Cleaning):
The truck-mounted carpet cleaning machine uses hot water extraction to rinse and extract the cleaning solution along with dirt and contaminants from the carpet. The high-pressure water, combined with powerful suction, helps to thoroughly clean and extract moisture from the carpet.
7. Drying:
7. Drying:
7. Drying:
Adequate drying time is between 5 to 7 hours, it essential to prevent mold or mildew growth. The powerful suction of the truck-mounted machine aids in extracting a significant amount of moisture, but proper ventilation or additional drying equipment may be used to expedite the drying process.